The Ring - Horror - HueForge

The Ring - Horror - HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 3mm and the Actual Depth is 3mm Can be rescaled just remember not to change the Z axis. Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Esun Red Transmission Distance: 1.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #19 (1.6mm) swap to Grey At layer #28 (2.32mm) swap to White for the rest. After printing use a lighter/ torch, by quickly passing the printed parts you will get rid of the tiny stringing on these type of prints. Thanks