Slicer Discord
the somewhat different dice – Modèle 3D imprimable de Thingiverse Thingiverse

the somewhat different dice

49 Téléchargements
33 Likes
0 Makes
Voir le modèle
the somewhat different dice

the dice consists of a disc with 6 magnets, on which the numbers or dots are placed. the disk is in a housing with 5 magnets. 2 magnets attract the disc and 2 offset by 90 degrees repel the disc. the disc is centered and pushed by a pin. in the pin sits a magnet and in the housing opposite also. these two repel each other and keep the disc in balance.

the hole for the magnet in the pin goes all the way through so that the position of the magnet can be changed and the disc can be brought into balance.
make sure that the magnets on the sides of the housing are always alternately polarized.

the pin and disc have a left thread and are simply screwed tightly into each other.
the recesses in the discs are made so that they can easily be colored with a thin felt-tip pen.

you need 4 screws M3 and 12 magnets Ø3 x 3mm
https://aliexpress.com/item/1005003952533499.html

assembling: screw the disc and pin together and press the 6 magnets into the disc. t
Source
Thingiverse
Ce qu'il faut pour imprimer: Intermédiaire Confiance faible
Monobloc Visserie requise
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 1/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
PLA
Post-traitement
Visserie
Logiciel
Cura, PrusaSlicer ou similaire
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection