Thingiverse
The Thinker Bookend
por bhty
995
Descargas
870
Likes
11
Makes
I needed bookends for my shelves. After digging around I didn't find anything that suits my needs just right.
However I found this awesome model of "The Thinker": https://www.thingiverse.com/thing:2164071
So I grabbed the "Lowest_poly_thinker_easier_to_print" model and started to modify it and here is what I came up with.
For my printing I used 0.2 mm layer height and no infill. Still if you want to have some infill anything in between 5%-20% should work just fine.
However I found this awesome model of "The Thinker": https://www.thingiverse.com/thing:2164071
So I grabbed the "Lowest_poly_thinker_easier_to_print" model and started to modify it and here is what I came up with.
For my printing I used 0.2 mm layer height and no infill. Still if you want to have some infill anything in between 5%-20% should work just fine.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
