Thingiverse
The ultimate wallet multitool
von argon32
1
Downloads
2
Likes
0
Makes
A wallet multitool with a school friendly box opener, fidget spinner, compass, phone stand, ruler, and USB drive.
Printed out of fiberon carbon fiber petg at 20% infill
recommended settings:
>20% infill
Any filament except silk PLA
0.2 mm layer height
needs a bearing with a 5mm ID and 11mm OD, can be found here https://www.amazon.com/MR115-2RS-Groove-Bearings-Pre-Lubricated-Miniature/dp/B0D5DF1HLS?gQT=0 or 3d printed from one of the many good designs.
Printed out of fiberon carbon fiber petg at 20% infill
recommended settings:
>20% infill
Any filament except silk PLA
0.2 mm layer height
needs a bearing with a 5mm ID and 11mm OD, can be found here https://www.amazon.com/MR115-2RS-Groove-Bearings-Pre-Lubricated-Miniature/dp/B0D5DF1HLS?gQT=0 or 3d printed from one of the many good designs.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
