The Walking Dead Logo

My friend asked for a Walking Dead logo print and I was surprised to find that on MakerWorld, the only ones I could find that included texture were hand painted. So I worked on making a version that doesn't need to be hand painted, but can get the texture from the print itself. This is a HueForge version of the Walking Dead logo. Normally HueForge prints are pretty thin though, so I did some work to make it thick so that it stands by itself. I have included a .3mf that takes care of the filament changes correctly, but if that doesn't work for you, I'll describe what I did.Normally, HueForge prints include the following instructions:"Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm" If you want to use a lot of filament for the thicker part of this print, feel free to use those instructions and the following information:NOT RECOMMENDED"Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic BambuLab Green