MakerWorld

Other Miniatures

The Wild Robot

by 3DJasi · Other Miniatures

130 Downloads

41 Likes

71 Makes

I made this model of the robot from The Wild Robot.The 5cm version is printed within 1.5h and the support is easily removed.I also printed a 20cm version which I spray painted with a chrome spray to get the metal-like look. Enjoy!

Category

Other Miniatures

Source

MakerWorld

Published

20.01.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does The Wild Robot need supports when printing?

Yes, The Wild Robot will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print The Wild Robot?

According to the design notes, The Wild Robot takes approximately 1.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is The Wild Robot available in?

The Wild Robot is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is The Wild Robot free to download?

Yes, The Wild Robot is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

The Wild Robot

Similar Models

Add to Collection