The Witch (2015)

The Witch (2015) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with BambuLab Basic Black At layer #10 (0.88mm) swap to BambuLab Matte Ash Gray At layer #12 (1.04mm) swap to BambuLab Basic Beige At layer #18 (1.52mm) swap to BambuLab Basic Jade White for the rest.