The Witch - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Sunlu Black Transmission Distance: 0.3 PLA Sunlu Gray Transmission Distance: 2.5 PLA Sunlu Light Gray Transmission Distance: 3 PLA Sunlu White Transmission Distance: 6Swap Instructions: Start with Black At layer #12 (1.03mm) swap to Gray At layer #21 (1.76mm) swap to Light Gray At layer #27 (2.24mm) swap to White for the rest.