THE WITCHER HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150.06x266.03mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA Generic Black Transmission Distance: 0.3 PLA Generic Jade White Transmission Distance: 5 PLA Generic Orange Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Jade White At layer #14 (1.2mm) swap to Orange for the rest.