The Witcher Hueforge

The model is based on Sapkowski's The Witcher. It is best to print it in four colors: black, gray, light gray and white. Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Gray Transmission Distance: 2.5 PLA Light Gray Transmission Distance: 3 PLA White Transmission Distance: 6 Swap Instructions: Start with Black At layer #6 (0.96mm) swap to Gray At layer #13 (2.08mm) swap to Light Gray At layer #17 (2.72mm) swa