TheArt VIII. HueForge

Picture source/author: SandySarten @sandysartenThen used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profile is also for A1 mini, with model size 150x150. If you want size 200x200 download this larger .stl and change it in the profile, or you can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.16mm and the Actual Depth is 2.16mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used:PLA Anycubic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Elegoo + Gray Transmission Distance: 3 PLA Elegoo Basic White Transmission Distance: 7This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Bl