Thingiverse
Theremin toy
von Lexiglass
8
Downloads
11
Likes
0
Makes
In the last Christmas vacation my youngest daughter soldered this little project together based on a kit by Whadda: https://whadda.com/product/madlab-electronic-kit-junior-theremin-wsg105/
It works well, but playing with the bare PCB (with sharp wires sticking out) and a battery dangling loose didn't sit well with my designer's heart. So I made it into a real toy using some 3D printing.
A video of the instrument in use is here: https://youtu.be/KWz99PhWZ4o
The switch is this model from AliExpress: https://nl.aliexpress.com/item/4000169106856.html
Two M3 screw inserts were used for the mounting of the frame to the outer shell. These are 5x5, so 5 mm diameter, 5 mm deep.
The screws are two M3 6 mm button head.
It works well, but playing with the bare PCB (with sharp wires sticking out) and a battery dangling loose didn't sit well with my designer's heart. So I made it into a real toy using some 3D printing.
A video of the instrument in use is here: https://youtu.be/KWz99PhWZ4o
The switch is this model from AliExpress: https://nl.aliexpress.com/item/4000169106856.html
Two M3 screw inserts were used for the mounting of the frame to the outer shell. These are 5x5, so 5 mm diameter, 5 mm deep.
The screws are two M3 6 mm button head.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
