Thingiverse
Thermistor Prism
por Oblivion
2
Descargas
0
Likes
0
Makes
A 3x3 grid and spacers intended to be used as the components of a prism with 27 thermistors mounted on three grids. Heat flow through this volume can be studied with this arrangement.
What to print:
3 ThermoGrids
4+ ThermoGridSpacers
How to construct:
Use hot glue or super glue to build a rectangular prism using the ThermoGridSpacers and the ThermoGrids as faces and an intermediate slice. Then, tape or glue thermistors into the mounting holes built into the ThermoGrids. This will give 27 temperature points that will allow you to take data on heat flow through this volume.
Recommended parts:
Raspberry Pi 2/3 + MCP3008 Analog to Digital Converters + 100kOhm Thermistors
Arduinos + 100kOhm Thermistors
What to print:
3 ThermoGrids
4+ ThermoGridSpacers
How to construct:
Use hot glue or super glue to build a rectangular prism using the ThermoGridSpacers and the ThermoGrids as faces and an intermediate slice. Then, tape or glue thermistors into the mounting holes built into the ThermoGrids. This will give 27 temperature points that will allow you to take data on heat flow through this volume.
Recommended parts:
Raspberry Pi 2/3 + MCP3008 Analog to Digital Converters + 100kOhm Thermistors
Arduinos + 100kOhm Thermistors
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
