Thingiverse
Thin Blue Line
door Winchie
155
Downloads
117
Likes
1
Makes
PLEASE READ FIRST
Design in Fusion 360 and printed using the MK3 MMU 2.0 i decided to model this flag to spec in accordance with the applicable rules and ordinances of flag design and size. So needless to say this model is drawn to scale.
Sliced in Slic3r Prusa Edition.
To properly import model, select 1 stl and import it, right click on that imported model and in the sub menu, click the setting button, once the new window opens, click on the load model button and select the rest of the parts, then import them. the slicer will import them into the correct locations and you then can assign the individual bodies to individual extruders.
Some slicers will auto size the flag to maximum bed size, some will not.
Slic3r Prusa Edition will auto scale model to 18% size, I printed this one shown here at 10% size
At 100% Flag is 1370mm (approx 54 inches) long
685mm (approx 27 inches) wide
100 mm (Approx 4 inches) thick
Ad
Design in Fusion 360 and printed using the MK3 MMU 2.0 i decided to model this flag to spec in accordance with the applicable rules and ordinances of flag design and size. So needless to say this model is drawn to scale.
Sliced in Slic3r Prusa Edition.
To properly import model, select 1 stl and import it, right click on that imported model and in the sub menu, click the setting button, once the new window opens, click on the load model button and select the rest of the parts, then import them. the slicer will import them into the correct locations and you then can assign the individual bodies to individual extruders.
Some slicers will auto size the flag to maximum bed size, some will not.
Slic3r Prusa Edition will auto scale model to 18% size, I printed this one shown here at 10% size
At 100% Flag is 1370mm (approx 54 inches) long
685mm (approx 27 inches) wide
100 mm (Approx 4 inches) thick
Ad
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!