Thin iPhone Case (2 Part Design) (Socket Case) (Iteration 4)

For more designs like this and to see the development of this project, check out my homepage here! (http://www.thingiverse.com/Rubiks_Cubist/about)

This is an iPhone 6 case with 4 hex sockets. The smallest (bottom) is 1/4", the next are 5/16", 3/8", and 1/2". In addition, there are tick marks on the side of the Metal to indicate where the edges of the sockets are even if you cant see them. These marks may be lost in the printing process. I have plans to add more socket holes (potentially metric) on the other side or some other utility. I will update this page when I decide. For now, that part is available as is.

Each side around the perimeter of the phone is 2 mm thick, and the back of the phone case is about 4 mm thick. The intention with this particular design is for the larger component to be cast/printed in metal, and for the smaller part that covers the top and bottom of the phone case to be printed in plastic. The file Cast Body.stl (the part intended to be in plastic) does