Thingiverse
Thin Micro SD Card Case
von husixu
66
Downloads
46
Likes
2
Makes
A tiny micro-sd card case.
- Holds 12 micro-sd cards.
- 51mm (diameter) × 9.5mm (thickness).
Print with ABS/PLA, with layer height less than 0.2mm. Layer height above 0.3mm will be too coarse for the screw part.
Also, remember to flip the cap upside-down in your printing software :)
- Holds 12 micro-sd cards.
- 51mm (diameter) × 9.5mm (thickness).
Print with ABS/PLA, with layer height less than 0.2mm. Layer height above 0.3mm will be too coarse for the screw part.
Also, remember to flip the cap upside-down in your printing software :)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
