ThinkPad TrackPoint Keyboard Angle Adjustment Part

What it isReplacement angle adjustment part for the ThinkPad TrackPoint Keyboard (KU1255). Designed as a spare for broken or missing pieces.This is a 3D-printable replacement part for the angle adjustment mechanism of the ThinkPad TrackPoint Keyboard (KU1255). I made it as a spare after my original piece broke / went missing. CompatibilityIntended for: ThinkPad TrackPoint Keyboard – KU1255If Lenovo produced revisions, fit may vary slightly. Please test-fit and adjust scaling if needed.Printing notesNo supports required in most cases (depending on your slicer/orientation).Print one first, test-fit, then print the final set.Recommended materialPETG (best balance of toughness and ease)ABS/ASA (good for heat resistance)PLA works for testing, but may be weaker for long-term use.Suggested print settings (baseline)Layer height: 0.16–0.20 mmWalls/Perimeters: 3–4Infill: 30–60% (or 100% if the part is very small)Brim: optional (use if adhesion is an issue)InstallationRemove the damaged/missing p