ThisIsFine Hugeforge

I created this hueforge due to some severe enterprise pressure ;)It's very nice on a desk or as a giveaway.It's nicer with a 0.2mm nozzle, but 0.4mm is fine ;)Only 3 color swaps required, can be done without AMS.Size: 12cm x 5.5cm Hueforge Instructions:Project: thisisfine.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 120x57.45mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mmFilaments Used: PLA+ eSun Black Transmission Distance: 0.5 PLA+ Esun Orange Transmission Distance: 3.4 PLA eSun Yellow Transmission Distance: 3.5 PLA+ eSun Milky White Transmission Distance: 1.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #15 (1.32mm) swap to Orange At layer #21 (1.8mm) swap to YellowBorder Only Colors from here until the end. At layer #25 (2.12mm) swap to Milky White for the rest.