Thingiverse
Thor Hammer
von jmcarles
2
Downloads
3
Likes
0
Makes
This is a Thor Hammer split into 3 parts and maintained with magnets. It can be installed on both sides of a glass window (4mm).
I used 12x5 mm magnets that are inserted during the print. (make a pause at 5.6mm and insert the magnets) Be careful on the magnet orientation.
I used 12x5 mm magnets that are inserted during the print. (make a pause at 5.6mm and insert the magnets) Be careful on the magnet orientation.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!