Thornton Force Waterfall Hueforge

This is a Hueforge I made from a photograph I took at Ingleton Falls waterfall trail in the UK. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.88x199.99mm in sizeYou may print at higher layer heights below the Base Thickness of 1.52mmThe Max allowed Thickness is 3.28mm and the Actual Thickness is 2.72mmFilaments Used:PLA Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Green Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #21 (1.76mm) swap to Dark Green At layer #25 (2.08mm) swap to Ash Gray At layer #27 (2.24mm) swap to Jade White for the rest.