Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Test Models / Thread Test
Thread Test – 3D printable model from MakerWorld MakerWorld
Test Models

Thread Test

by ID1OTMAN · Test Models
40 Downloads
11 Likes
22 Makes
Go to Model
This test provides a screw thread of 15mm and a set of 3 holes the left one 15mm indicated by the 0.0 as there is no change, the middle one being 15.5mm the 0.5 meaning the hole is that much larger and a 16mm hole on the right the 1.0 meaning the hole is 1mm larger.
Category
Test Models
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

5 Suggestions
Mystic Turtle's Calibration Station
Mystic Turtle's Calibration Station
by MysticTurtle
↓ 52 ♥ 29
Metric Thread Tester, M3 - M14
Metric Thread Tester, M3 - M14
by TVPE
↓ 13 ♥ 14
3/8 - 16 UNC Printed Thread Test Print (Tap Handle Thread Size)
3/8 - 16 UNC Printed Thread Test Print (Tap Handle Thread Size)
by Jtexans4
↓ 2 ♥ 1
Metric self tapping thread test jig (F3D parametric model)
Metric self tapping thread test jig (F3D parametric model)
by XNDR
↓ 29 ♥ 4
Test print for threaded heat inserts, size M3
Test print for threaded heat inserts, size M3
by FpS
↓ 85 ♥ 12
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection