Three wise skeletons HueForge

All three are in one profile. The print settings are the same. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.Models size, the is 200x200 mm with the frame. You can also scale it but only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.24mm and the Actual Depth is 2.24mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.Filaments Used:PLA Anycubic Black Transmission Distance: 0.3PLA Sunlu Meta Grey Transmission Distance: 3.5PLA Aurapol Beige Transmission Distance: 2.4PLA Elegoo Basic White Transmission Distance: 7This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GreyAt layer #12 (1.04mm) swap to BeigeAt layer #17 (1.44mm) swap to White for the rest. Sh