Thingiverse
Thrustmaster TMX replacement gear
door smik67
19
Downloads
17
Likes
0
Makes
This is a remix from https://www.thingiverse.com/thing:2754967
Again, all credit goes to @rapsacw for creating the gear for the T150. I made few modifications to fit the TMX (including a larger notch for the rubber seal, tapered shaft-hole, and larger chamfer for the base of the shaft.
Notes:
1- you will need to print another piece (for the encoder sensor) in black to fit on the back side of this piece. That can be found here: https://www.thingiverse.com/thing:4063945
2- The 3D model is scaled by 10 (artifact of F360). So, you need to scale it down by 10, then use mm as units.
Again, all credit goes to @rapsacw for creating the gear for the T150. I made few modifications to fit the TMX (including a larger notch for the rubber seal, tapered shaft-hole, and larger chamfer for the base of the shaft.
Notes:
1- you will need to print another piece (for the encoder sensor) in black to fit on the back side of this piece. That can be found here: https://www.thingiverse.com/thing:4063945
2- The 3D model is scaled by 10 (artifact of F360). So, you need to scale it down by 10, then use mm as units.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
