Thingiverse
Thrustmaster Warthog Joy-Con Collective Mod
door Mahrol
3
Downloads
3
Likes
0
Makes
Modified the 'Thrustmaster Warthog (TMWH) Collective Xbox One Clip-on' by 'Asherao' to work with Joy-Cons.
I also separated the parts for better printing options and added a little drop-in block to decrease the throttle range.
Parts needed:
- 2x M5x25 + nuts
- 2x M2x6 + nuts
Printing:
(Depending on your printer + settings)
- Mount, Grip and Tip printed with supports
- Joy-Con mount printed without supports
- Grip printed with Fuzzy Skin (use modifiers to exclude inner parts)
Additional notes:
- Sliced in OrcaSlicer.
- You might need to do some filing to get everything to fit right.
- I got cheap after-market Joy-Cons from AliExpress, they work just fine.
- If you haven't used Joy-Cons on PC before, make sure you get a BT4.0 adapter (I have the TP-Link UB400).
- I used hair-ties to pull the throttles together and decrease the wiggle room on the collective.
I also separated the parts for better printing options and added a little drop-in block to decrease the throttle range.
Parts needed:
- 2x M5x25 + nuts
- 2x M2x6 + nuts
Printing:
(Depending on your printer + settings)
- Mount, Grip and Tip printed with supports
- Joy-Con mount printed without supports
- Grip printed with Fuzzy Skin (use modifiers to exclude inner parts)
Additional notes:
- Sliced in OrcaSlicer.
- You might need to do some filing to get everything to fit right.
- I got cheap after-market Joy-Cons from AliExpress, they work just fine.
- If you haven't used Joy-Cons on PC before, make sure you get a BT4.0 adapter (I have the TP-Link UB400).
- I used hair-ties to pull the throttles together and decrease the wiggle room on the collective.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!