ThunderCats Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 162.01x246.60mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA Elegoo Black Transmission Distance: 0.2 PLA Elegoo Beige Transmission Distance: 1 PLA Elegoo Grey Transmission Distance: 2.2 PLA Elegoo Dark Bule Transmission Distance: 2.8 PLA Elegoo Light Blue Transmission Distance: 2 PLA Elegoo Orange Transmission Distance: 5.6 PLA Elegoo True / Ruby Red Transmission Distance: 4.3 PLA Elegoo Yellow Transmission Distance: 5.6 PLA Elegoo White Transmission Distance: 5.5This print uses 9 unique filaments !!!! It is possible to print this hueforge with a single AMS unit just organize your filament swap in away that makes the most sense to you !!!!! Swap Instructions: Start with Black At layer #4 (0.28mm) swap to Beige At layer #6 (0.36mm) swap to Grey At layer #10 (0.52mm) swap to Dark Bule At layer #13 (0.