Thundercats Hueforge

Project: Thundercats.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x199.94mm in size You may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Elegoo Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Beige At layer #12 (1.04mm) swap to Jade White At layer #19 (1.6mm) swap to Red Border Only Colors from here until the end. At layer #27 (2.24mm) swap to Black for the rest.