Thunderjaw Posable 75cm

--ATTENTION--This model is not made to play, but to pose and then glue in the poseThe model in the images is hand painted, and is not present an AMS filebefore printing read the full description --INFORMATION--the antennas must be printed in 0.2mm nozzle, if you don't have the nozzle there is a thunderjaw version whithout themThe ball joints are very delicate, depending on your printer calibration they may or may not fit in the socket, to solve this problem the socket is longer than necessary, for the neck ball joints follow this steps: - Do a fit test on the joints - If the joint is loose I advise to put some tape on the ball to add width - If they don't fit don't force the joint or the socket will break, then cut the socket as shown on the picture BEFORE