Thingiverse
Ti99RamCaseBackbit
by markeno
1
Downloads
1
Likes
0
Makes
I recently purchased one of Backbit.io's TI99/4a 32k Ram Sidecar boards. It comes as a bare board without a case option at this time. I took a bit of time to come up with a case for it.
The first test had a defect, the second the board was way too loose inside. The next was a much better fit for the board.
It requires an appropriate brass insert and screw. I used a 3mm screw and insert.
The short name file is the side toward the TI99. The other two files are options for the outer portion, the one has a text inlay (.28mm) deep, the other is smooth unmarked.
The first test had a defect, the second the board was way too loose inside. The next was a much better fit for the board.
It requires an appropriate brass insert and screw. I used a 3mm screw and insert.
The short name file is the side toward the TI99. The other two files are options for the outer portion, the one has a text inlay (.28mm) deep, the other is smooth unmarked.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
