Board Games & Card Games STL Download - TIC TAC TOE MINIby ILNUR_KHARISOV

Tic-tac-toe is a wonderful board game that promotes the development of logical thinking and memory training.Settings for multicolor printing:First 3 layers use the main color, then change to another color, last 3 layers print with the main color again.Photo of the model printed on a printer without using a multi-color printing device. Product Features:-Compact size - 56-56-12 mm.-On-site printing.-An interesting and exciting game that develops logical thinking and finger dexterity.-Printed with the most common. plastic (PLA)-Does not require support.-Doesn't require assembly.-Anti-stress toy.Dimensions:Height - 12mm.Width - 56mm.Length - 56mm.Weight - 25-30 grams.Warning:The distance between the moving parts is 150-200 microns, some parts may stick to each other a bit, just push on them to get them off each other. If you have any problems email me.I added a 3mf file for BAMBU LAB and an STL file for the rest of the printersDon't forget to share your prints. If you have any problems write to meAll my models are for personal use onlyDon't forget to subscribe to me3D PRINTING SETTINGS:Software slicer - Ultimaker Cura, PrusaSlicer, Bambu Studio Printer - Any FDM 3D printerFilament - PLA Infill -15%Noozle Temp - 215-220°CSupport - NoFirst Layer Height - 0.2 mmLayer Height - 0.2 mm Nozzle - 0.4 mm (2 walls)Don't forget to set up a high-quality first layer on your printer, tighten the belts - to get high-quality printing. If some parts stick off the table, use 3D glue, print the first layer at a slow speed without blowing. These settings will help you get a high-quality model the first time. Select the speed depending on your printer and experience in printing with PLA.