Tie Fighter Hueforge

Star wars tie fighter hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133x236.36mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Blue Gray At layer #16 (1.36mm) swap to Ash Gray At layer #20 (1.68mm) swap to Ivory White for the rest.