Thingiverse
Tie Hanger (3 ties)
von thepickler
7
Downloads
5
Likes
0
Makes
Threw this together real quick and hoped it would give some organization to my life.
If you decide to print this, be sure to scale it down from 100% to 80% if your printer is smaller. I would recommend printing at about 30-40% infill with a 0.15+ or so layer height.
If you decide to print this, be sure to scale it down from 100% to 80% if your printer is smaller. I would recommend printing at about 30-40% infill with a 0.15+ or so layer height.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
