Thingiverse
Tifa Onahole
by Sandrunas
26
Downloads
16
Likes
0
Makes
This is an onahole based on Tifa Lockheart from Final Fantasy seven.
The core is inspired by her chest (job).
You need to print both shells and the core, fit them together and seal the mold. I use hot glue, but there are better ways. Fill the mold with low tensile Silicone like Ecoflex. If you freeze the filled mold, the silicone will cure slower and air bubbles can escape.
Mass 180 g
The core is NOT interchangeable with other Models.
The core is inspired by her chest (job).
You need to print both shells and the core, fit them together and seal the mold. I use hot glue, but there are better ways. Fill the mold with low tensile Silicone like Ecoflex. If you freeze the filled mold, the silicone will cure slower and air bubbles can escape.
Mass 180 g
The core is NOT interchangeable with other Models.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
