Tig Tungsten Grinder

TIG/WIG Grinding Tool for Dremel Multitools

01.07.2019 Release
03.07.2019 60 deg and Combi Head for all 3 angles added
23.11.2019 Heads 1.0mm added
06.01.2020 Absaugung (extraction) added
08.09.2020. Collet for Parkside added
27.01.2021 Add for metall insert added (if you have a lathe)

What you need: Dremel / Parkside Multitool, 35mm Diamond Grinding Disk (f.eg. ebay)
Each Head has 3 positions that can be used, each Position uses a different radius on the grinding disk
Diameter available: 1.0mm, 1.6mm and 2.4mm
Angles available: 30 deg, 45 deg and 60 deg als well as a combi head

Health and Safty Warning
You do it on your own risk

How to set up
Step1
Insert the shaft of the grinding wheel into the collet chuck and tighten it slightly (so that it still move a bit and sticks out of the lower part). Screw the lower part of the tool onto the dremel.

Step2
Put the grinding wheel onto the shaft (without the screw) and use the top part of the tool to press the grindi