Tiger HueForage

This is a great Print! The pictures don't do it justice. It can be printed on an AMS by switching out the black to white after it is done printing layer 8 layer. The white then needs to be assigned or directed to print from the black slot. Project: Tiger v2.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmThe Model is 200x155.04mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Bambu Basic Black Transmission Distance: 1.4 PLA BambuLab Basic yellow Transmission Distance: 8 PLA BambuLab Metal Copper Brown Metallic Transmission Distance: 1.4 PLA Coli3o Orange Transmission Distance: 7.3 PLA Bambu Lab matte ivory white Transmission Distance: 3.7This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.52mm) swap to yellow mod At layer #9 (0.56mm) swap to Copper Brown Metallic At layer #16 (0.84mm) swap to Orange At layer #22 (1.08mm