Thingiverse
Tiger Lithopane
137
Descargas
108
Likes
0
Makes
1. Drag the last photo into cura as it's the file for the lithophane.
2. Decide how thick you want it to be, let's say 3mm. The first parameter Cura wants is the height, this is the "up and down" part. So i'll set this to 2.4
3. Now the base, this is the remainder of the 3mm, so 0.6.
4. Then decide how big you want the thing, mine was at 130mm.
5. Darker is higher!
6. Print with 1 wall when using something as dark as my silver. (I used 2 because I'm stupid.)
7. Or just forget everything and use the .stl :)
2. Decide how thick you want it to be, let's say 3mm. The first parameter Cura wants is the height, this is the "up and down" part. So i'll set this to 2.4
3. Now the base, this is the remainder of the 3mm, so 0.6.
4. Then decide how big you want the thing, mine was at 130mm.
5. Darker is higher!
6. Print with 1 wall when using something as dark as my silver. (I used 2 because I'm stupid.)
7. Or just forget everything and use the .stl :)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
