Tiger MiniChonker

I’d recommend printing no smaller than 0.12, using 0.4 nozzle, 10% infill at least and fairly slow. It does need supports but you can get away with tree supports with 0 infill.Print him at 57mm tall if you want to use 8mm cabochon eyes and 75 mm if you would like to use 10mm cabochon eyes:)I usually print him with 3 walls and 15% infill. For support choose a minimal setting (like snug for Bambu printers) and increase the top z distance a little. He only needs support for his paws.I recommend using Tamiya Model Paints to paint him up and Julie Wang cabochon eyes:)