Tiki Drinking Monkey

This is an art tile I made for the wall of my tiki bar. It shows my spirit animal enjoying a stiff drink. Longer print time but few filament changes. I've also found that using a dark blue/purple instead of black will give a nice effect with this print.----------------------------------Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BlackPLA GrayPLA Metallic GoldPLA WhiteSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GrayAt layer #14 (1.2mm) swap to Metallic GoldAt layer #17 (1.44mm) swap to White for the rest.