Tilt Motor Mount

Tilt mount mechanism for RC planes, Tailsitters, VTOL. Tried to make it as simple as possible and easy to print.
Designed for 10mm square tube mounting, 3mm fasteners, 9g Servo (EMAX ES-09MD or D213F Exi servos recommended). Two 3x8x4mm ball bearings required. 14mm square and 16/19mm mounting holes are provided.

Linkage is the least slop and strongest if using ball links, but Dubro EZ link type with metal pushrod can work well also.

Two bases are provided. One with a built-in stop for tilt-rotor plane applications using vertical to horizontal positions,where a solid 90 deg horizontal stop is needed to assure that dual motors are aligned perfectly for forward flight. The other for Tailsitter applications which use +/-45 deg tilts from vertical. Ball link positions for each use are provided into the pivot motor mount

A mounting channel for attaching the 10mm square carbon tube to a flat bottom wing is also provided. In addition, a submount for a MiniTalon wing is provided that