Time management

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 1.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA Hatchbox White Transmission Distance: 10This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #15 (0.72mm) swap to Beige At layer