Tinker Bell Hueforge

Project: Fée Clochette.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Green At layer #11 (0.96mm) swap to Jade White At layer #12 (1.04mm) swap to Marine Blue At layer #13 (1.12mm) swap to Jade White At layer #14 (1.2mm) swap to Red At layer #16 (1.36mm) swap to Jade White At layer #18 (1.52mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest. Comment