Tinkerbell see-trough

This one is a see-trough. If you put a light behind it or in front of a window it will let light troughPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x149.8mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA Prusament Galaxy Green Transmission Distance: 3.2PLA BambuLab Basic Jade White Transmission Distance: 4.7This print uses 2 unique filamentsSwap Instructions:Start with Galaxy GreenAt layer #24 (2mm) swap to Jade White for the rest.