Thingiverse
Tinkerlight Desk Lamp
par bball61
31
Téléchargements
44
Likes
0
Makes
This is the desk lamp design for the Tinkerlight system. It requires the lamp hardware kit.
Full details of the system are at:
http://robot50.net/projects/tinkerlight/
I have a batch of hardware kits for sale on ebay for $5 each: http://www.ebay.com/itm/-/152286884727?.
You will also need your own USB power source.
The desk lamp has a spare design with an H base and an arm that can extend from about 9 inches of total lamp height to about 12 inches. The shade pivots and the base includes two cord keepers. The spot lens in the kit may optionally be mounted for a tighter pool of light.
The light source supplied with the kit is a neutral white (4000-4500k) LED that consumes 2.25 watts (450ma at 5 volts).
The desk lamp parts will print on most printers without supports and a 6x6x6 build platform. ABS is recommended for its higher heat resistance but the lamp will work with PLA.
Full details of the system are at:
http://robot50.net/projects/tinkerlight/
I have a batch of hardware kits for sale on ebay for $5 each: http://www.ebay.com/itm/-/152286884727?.
You will also need your own USB power source.
The desk lamp has a spare design with an H base and an arm that can extend from about 9 inches of total lamp height to about 12 inches. The shade pivots and the base includes two cord keepers. The spot lens in the kit may optionally be mounted for a tighter pool of light.
The light source supplied with the kit is a neutral white (4000-4500k) LED that consumes 2.25 watts (450ma at 5 volts).
The desk lamp parts will print on most printers without supports and a 6x6x6 build platform. ABS is recommended for its higher heat resistance but the lamp will work with PLA.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
