Thingiverse
Tiny drill bit collet for regular drills
por admica
32
Descargas
20
Likes
0
Makes
I got a set of drill bits smaller than 1/32" that are so small they don't fit in my regular electric drill. I made this adapter, known as a collet, to squeeze hold of the drill bits for use with my regular drill.
I used a 3/64th bit to widen some pads in a thru-hole PCB. The STL file will work with 1/64, 3/64, and 1/32" bits as is. If you need to go smaller than 1/64", adjust the scad and export your STL.
The scad is parameterized so you can easily adjust the center hole, the slot gap, overall height, and the base pad.
I used a 3/64th bit to widen some pads in a thru-hole PCB. The STL file will work with 1/64, 3/64, and 1/32" bits as is. If you need to go smaller than 1/64", adjust the scad and export your STL.
The scad is parameterized so you can easily adjust the center hole, the slot gap, overall height, and the base pad.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!