Tiny Hold Down M6 Hardware

**There is an issue in MakerLab where the number wont update, the height of the model changes but not the number. I have seen a few of these style of clamps pop up and thought they might be useful so I made my own and tried them out, they work really well. I used these furniture style bolts to help solve the bolt length issue that I saw in a few videos and so far so good. I made this version to fix the more common M6 hardware. Below are the amazon links to the ones that I used but most M6 Chicago or Furniture style bolts should work, I found 12 or 16 mm to be the most usefull. M6 x 20mm Chicago Screws - https://a.co/d/12aJmKc So you can print them out on their side or on the 45' chamfer on the back of the clamp, I have done some testing and both orientations work well. Some people were asking about what I used on the track part so here is a link to the track inserts I made for both M5 and M6.T-Track Insert Nut for M5 and M6 Hardware: https://makerworld.com/en/models/2146982-track-i