Thingiverse
Tiny Mac 128K Video Player
von Megazoid
2
Downloads
10
Likes
0
Makes
Somebody requested the STL files from my video 3 years ago titled [Tiny Mac 128K Video Player](https://www.youtube.com/watch?v=LeRtSgUIQ_0)
The STL's were modified from [this Tiny Mac](https://www.instructables.com/Making-a-Tiny-Mac-From-a-Raspberry-Pi-Zero/) project on Instructables.com to fit parts that I had at the time.
The internals are basically the same ones used in [The Simpsons TV by Brandon Withrow](withrow.io/simpsons-tv-build-guide) but with the addition of a battery and bits related to that.
It needs couple of nuts and bolts to fix the front to the back. I think they were M3 Hex nuts and M3 X 12mm Hex Socket Head Cap Screws (same as the original Instructable)
I think I printed it without supports, but it could probably use some on the overhangs.
The STL's were modified from [this Tiny Mac](https://www.instructables.com/Making-a-Tiny-Mac-From-a-Raspberry-Pi-Zero/) project on Instructables.com to fit parts that I had at the time.
The internals are basically the same ones used in [The Simpsons TV by Brandon Withrow](withrow.io/simpsons-tv-build-guide) but with the addition of a battery and bits related to that.
It needs couple of nuts and bolts to fix the front to the back. I think they were M3 Hex nuts and M3 X 12mm Hex Socket Head Cap Screws (same as the original Instructable)
I think I printed it without supports, but it could probably use some on the overhangs.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!