Tiny NAS (ODROID H4 Ultra)

NAS-Case based on the ODROID H4 Ultra Mini PC. The model is based off-of NAS ITX PC Case with stackable expansions [MODCASE MASS]https://www.printables.com/model/590711-nas-itx-pc-case-with-stackable-expansions-modcase/files It houses a maximum of 4 3.5-inch HDDs and includes 2 fans.All the parts screw together using M3x20 self-tapping screws. Only the TOP_Odroid and Middle_Odroid parts are connected using 14 2x6mm magnets.The motherboard is secured using 10mm high threaded inserts. NOTE: Make sure you insert them fully to the bottom for proper alignment. This design allows the Odroid to be serviced without unscrewing the entire assembly. The model is built as follows:- Screw the bays_front and bays_rear together.- Screw the base underneath it.- Add the TPU feet.- The Fan_cover and Cable_cover can simply be clicked in place.- The BOTTOM_Odroid screws into the Middle_Odroid (countersunk screw holes).- Then, this assembly goes on top of the bays and is screwed in from inside the bays to