Slicer Discord
Tiny Pet Bottles – 3D-Druckmodell von Thingiverse Thingiverse
Tiny Pet Bottles – Bild 1 Tiny Pet Bottles – Bild 2 Tiny Pet Bottles – Bild 3 Tiny Pet Bottles – Bild 4 Tiny Pet Bottles – Bild 5 Tiny Pet Bottles – Bild 6
Household

Tiny Pet Bottles

440 Downloads
421 Likes
3 Makes
Zum Modell
It is a small bottle for recycling plastic bottle caps. Liquids such as condiments can also be included.

Diameter is the same as PET bottle cap 30 mm.

S size is 12 ml with cap included 32 mm. 20 ml of M size 44 mm. L size is 40 ml with 82 mm.

S size has holes for neodymium magnets. If you fix the magnet with adhesive, it sticks to the refrigerator etc.

ペットボトルのキャップを再利用するための小型ボトルです。調味料などの液体も入れられます。

直径はペットボトルキャップと同じ30mmです。

Sサイズがキャップ込み32mmの12ml。Mサイズが44mmの20ml。Lサイズはが82mmの40mlです。

Sサイズははネオジム磁石用の穴があります。磁石を接着剤で固定すれば冷蔵庫などにくっつきます。
Kategorie
Household
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
50 mm (Klein)
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen