Thingiverse
TINY_RACK EURORACK CASE (WITH POWER PCB)
von ke_bitiworkshop
22
Downloads
34
Likes
0
Makes
tiny_rack is a eurorack rack project for DIYer with just starting DIY eurorack modular synthesizers.
See full project (with power pcb) here:
https://github.com/KevinKeWang/tiny_rack
- One-piece 3D printed, no splicing, no metal rails required.
- Maximum current: +12V 1500mA, -12V 1500mA, +5V 6500mA.
- Optional +3.3V 500mA for easy project prototyping.
- Full load tested.
- The +12V and -12V output ripple is less than 100mV under all load conditions.
- Exposed M3 screw terminals for direct connection to the test power supply. Clamps can be directly.
See full project (with power pcb) here:
https://github.com/KevinKeWang/tiny_rack
- One-piece 3D printed, no splicing, no metal rails required.
- Maximum current: +12V 1500mA, -12V 1500mA, +5V 6500mA.
- Optional +3.3V 500mA for easy project prototyping.
- Full load tested.
- The +12V and -12V output ripple is less than 100mV under all load conditions.
- Exposed M3 screw terminals for direct connection to the test power supply. Clamps can be directly.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
