Thingiverse
Tiny Reflow Controller V2 Faceplate for Toaster Oven
par rullywow
2
Téléchargements
0
Likes
0
Makes
Mounting plate for the Tiny Reflow Controller V2.
Implementation inspired by Adam Welch's video here: https://youtu.be/W-GiYl034mc
Hole in the toaster oven is about 35mm. Use M3 screws (button head or hex cap) to secure the faceplate to the oven.
I used M3 screws and nylon locking nuts to secure the faceplate/Tiny Reflow Controller to the oven itself.
Printed in PLA (PETG or ABS works good too) with 15% infill.
Implementation inspired by Adam Welch's video here: https://youtu.be/W-GiYl034mc
Hole in the toaster oven is about 35mm. Use M3 screws (button head or hex cap) to secure the faceplate to the oven.
I used M3 screws and nylon locking nuts to secure the faceplate/Tiny Reflow Controller to the oven itself.
Printed in PLA (PETG or ABS works good too) with 15% infill.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !