Tiny Trak w/ 18350

This is a remix of the original Tiny Trak by SnappyFPV. I have modified the vehicle to use an 18350 lithium battery. I have also added tabs to hold the top body to the chassis with screws. You might need to drill them to correctly fit your screws. I have also modeled a wheel with the correct size hole to glue in the cut down servo horn so you can mount the wheel to the servo. I found it a little difficult to drill the lego wheel in the center.

The wheel needs to be printed with supports. It's a little difficult to remove but its possible.

The chassis just needs support touching the bed. Same as the original.

Lookup the original Tiny Trak vehicle for all building instructions.
https://www.thingiverse.com/thing:2896083

You can find my shelf here
https://www.thingiverse.com/thing:3231675

Here is the best writeup I've found for modifying a servo for continuous rotation
https://learn.adafruit.com/modifying-servos-for-continuous-rotation/overview